FIELDS OF USE
THERMO NETPER WATERBLOCKER It is a special waterproofing product. Positive and negative surfaces can be insulated with the same product. It is easily applied on floors. terraces, pools, ornamental pools, interior surfaces with moisture and humidity, and on points that require many waterproofing.

APPLICATION PROCEDURE
The surface should be dry, clean, solid and free from dust, oil, dirt or materials that prevent adhesion should be removed from the surface, materials such as mortar and cement residues should be scraped off.

APPLICATION INSTRUCTIONS
10 It B Component is poured into a clean bucket. THERMO NETPER WATERBLOCKER, component A is poured in 25 kg to cover the water surface. Wait for a few minutes. It is mixed by using a low-speed mechanical mixer until it reaches a homogeneous consistency. Depending on the consistency, 1 liter of water can be added. After mixing, the mortar is ready to use. It can be applied with a roller, brush or steel satin trowel. The mortar in the container can be used for about 1 hour.

PACKAGING
THERMO NETPER WATERBLOCKER: It is presented in craft bags of 25 kg net and with 10 kg of Latex.

STORAGE CONDITIONS
It should be stored in its unopened original package, in a dry (maximum 60% relative humidity) and cool (temperature between + 5 C° and +25 C°) and its shelf life is 12 months. One palette contains 60 bags, which equals 1,500 liters.

ENVIRONMENTAL IMPACTS
Not classified as dangerous.

HAZARD WARNINGS
The product is based on cement and consequently is alkaline. If wet mortar comes into contact with the skin, wash affected areas with plenty of water. In case of contact with the eyes, consult a doctor. Users should refer to the Material Safety Data Sheet (MSDS). It contains details of the physical, ecological and toxicological characteristics of the product and other information concerning safety, and how to obtain safety information and advice about the transport, storage and disposal of chemical products.

LIABILITIES
The information provided here about THERMO NETPER products, and in particular recommendations regarding their application and final use, is given in good faith on the basis of the manufacturer’s best current knowledge and experience. Inasmuch, when using THERMO NETPER products, make sure the right product is applied in the right conditions to suitable surfaces. Otherwise, THERMO NETPER cannot be held liable for any damage. THERMO NETPER reserves the right to modify the characteristics of its products. Users should refer to the latest edition of the product data sheet.