Thermal Paint – Thermonetper https://www.thermonetper.com Sun, 03 Nov 2024 06:25:27 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.1 Satin Plaster 25 Kg https://www.thermonetper.com/en/product/satin-plaster-25-kg/ https://www.thermonetper.com/en/product/satin-plaster-25-kg/#respond Wed, 10 Jul 2024 21:14:24 +0000 https://www.thermonetper.com/?post_type=product&p=15630 Cement based speciial satin polly without plaster and lime. ]]>

FIELDS OF USE
THERMO NETPER SATIN PLASTER is a special putty. Thermo Netper can be applied on interior surface filler plaster or plastered surfaces, as well as on gross concrete black plaster or cement based different filling surfaces.

APPLICATION PROCEDURE
The surface should be dry, clean, solid and free from dust, oil, dirt or materials that prevent adhesion should be removed from the surface, materials such as mortar and cement residues should be scraped off.

APPLICATION INSTRUCTIONS
6.5-7 liters of water is poured into a clean bucket. THERMO NETPER SATIN PLASTER is sprinkled up to 10 kg to cover the water surface. Wait for a few minutes. It is mixed by using a low-speed mechanical mixer until it reaches a homogeneous consistency. After mixing, the mortar is ready to use. The mortar in the container can be used for about 1 hour.

STORAGE CONDITIONS
It should be stored in its unopened original package, in a dry (maximum 60% relative humidity) and cool (temperature between + 5 C° and +25 C °) and its shelf life is 12 months. One palette contains 60 bags, which equals 1,500 liters.

ENVIRONMENTAL IMPACTS
Not classified as dangerous.

HAZARD WARNINGS
The product is based on cement and consequently is alkaline. If wet mortar comes into contact with the skin, wash affected areas with plenty of water. In case of contact with the eyes, consult a doctor. Users should refer to the Material Safety Data Sheet (MSDS). It contains details of the physical, ecological and toxicological characteristics of the product and other information concerning safety, and how to obtain safety information and advice about the transport, storage and disposal of chemical products.

LIABILITIES
The information provided here about THERMO NETPER products, and in particular recommendations regarding their application and final use, is given in good faith on the basis of the manufacturer’s best current knowledge and experience. Inasmuch, when using THERMO NETPER products, make sure the right product is applied in the right conditions to suitable surfaces. Otherwise, THERMO NETPER cannot be held liable for any damage. THERMO NETPER reserves the right to modify the characteristics of its products. Users should refer to the latest edition of the product data sheet.

]]> https://www.thermonetper.com/en/product/satin-plaster-25-kg/feed/ 0 Thermal Ceramic Paint (Exterior) 18 L https://www.thermonetper.com/en/product/thermal-ceramic-paint-exterior-18-l/ https://www.thermonetper.com/en/product/thermal-ceramic-paint-exterior-18-l/#respond Wed, 10 Jul 2024 21:12:15 +0000 https://www.thermonetper.com/?post_type=product&p=15627 ]]>

USAGE AREAS
Suitable for houses, living quarters, public buildings, production plants, storages, warehouses, hangars, cold storages, rail systems, tunnels, geothermal facilities and fields, power transmission lines, power distribution units, silos and many more domestic and industrial exteriors.

ADVANTAGES AND PRODUCT FEATURES
• Has low thermal conductivity
• Provides up to 50% thermal and energy saving
• Protects structure’s heat balance
• Non-flammable
• 100% waterproof
• Elastic. No cracking or disjuncture
• Prevents moisture, damp, and mold
• Easy to apply
• Water-based
• Breather. Doesn’t make condensation
• Unlimited color alternatives

APPLICATION
Before using the paint, read the instructions. Package must be mixed with a low-speed mixer. If the package is open, do not use it and contact with the supplier. If the break between the paintings is long, mix the package again before using. It is very important and delicate issue for spreading of the ceramics on the surface. Application area must be cleaned from oil, dirt and double skins. RP-PRIMER must be applied as primer lining, and be put to dry for 3hours. Do not add water or solvent to the product. Apply 2 coats. Wait approximately 6 hours between the coats. Ideal application temperature is between 5°C to 40°C.

STORAGE AND SHELF LIFE
24 months from production date, if stored dry condition.

]]> https://www.thermonetper.com/en/product/thermal-ceramic-paint-exterior-18-l/feed/ 0 Thermal Ceramic Paint (Interior) 18 L https://www.thermonetper.com/en/product/thermal-ceramic-paint-interior-18-l/ https://www.thermonetper.com/en/product/thermal-ceramic-paint-interior-18-l/#respond Wed, 10 Jul 2024 21:09:48 +0000 https://www.thermonetper.com/?post_type=product&p=15624 It provides up to 50% THERMAL INSULATION and ENERGY SAVINGS. ]]>

USAGE AREAS
Suitable for houses, living quarters, public buildings, production plants, storages, warehouses, hangars, cold storages, rail systems, tunnels, geothermal facilities and fields, power transmission lines, power distribution units, silos and many more domestic and industrial interiors.

ADVANTAGES AND PRODUCT FEATURES
• Has low thermal conductivity
• Provides up to 50% thermal and energy saving
• Protects structure’s heat balance
• Non-flammable
• 100% waterproof
• Elastic. No cracking or disjuncture
• Prevents moisture, damp, and mold
• Easy to apply
• Water-based
• Breather. Doesn’t make condensation
• Unlimited color alternatives

APPLICATION
Before using the paint, read the instructions. Package must be mixed with a low-speed mixer. If the package is open, do not use it and contact with the supplier. If the break between the paintings is long, mix the package again before using. It is very important and delicate issue for spreading of the ceramics on the surface. Application area must be cleaned from oil, dirt and double skins. RP-PRIMER must be applied as primer lining, and be put to dry for 3hours. Do not add water or solvent to the product. Apply 2 coats. Wait approximately 6 hours between the coats. Ideal application temperature is between 5°C to 40°C.

STORAGE AND SHELF LIFE
24 months from production date, if stored dry condition.

]]> https://www.thermonetper.com/en/product/thermal-ceramic-paint-interior-18-l/feed/ 0